Removal [06/2015 - ]: Procedure

Refer to PROCEDURE - Step 4 [06/2015 - 11/2018] , or refer to PROCEDURE - Step 4 [11/2018 - ]

Refer to PROCEDURE - Step 5 [06/2015 - 11/2018] , or refer to PROCEDURE - Step 5 [11/2018 - ]

Refer to PROCEDURE - Step 6 [06/2015 - 11/2018] , or refer to PROCEDURE - Step 6 [11/2018 - ]

Refer to PROCEDURE - Step 1

Refer to PROCEDURE - Step 8 [06/2015 - 11/2018] , or refer to PROCEDURE - Step 8 [11/2018 - ]

1. Disconnect the 2 connectors.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Remove the 7 screws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. As shown in the illustration, slightly raise up the door trim upper panel assembly LH.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1	Door Trim Upper Panel Assembly LH
   	Raise Up
   	Place Hands Here

   HINT: 

   Raise up the door trim upper panel assembly LH far enough that the front door pull handle LH can be removed.

4. Remove the front pull handle LH as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

5. Remove the 8 screws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

6. Disengage the guide to remove the front door armrest base panel assembly LH.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

7. Remove the 3 screws and multiplex network master switch assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002