LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Mirai >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> (Doors / Hatch) - Service Information >> Hood >> Reassembly [06/2015 - ] >> Procedure

Reassembly [06/2015 - ]: Procedure

  1. CONNECT WASHER HOSE 
    1. Engage the clamps to install the washer hose.
      GTY561911Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. ADJUST WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  4. INSPECT WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

  5. INSTALL HOOD INSULATOR 
    1. Engage the guides.
      GTY561912Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the hood insulator with 6 new clips.
  6. INSTALL HOOD TO RADIATOR SUPPORT SEAL 
    1. Engage the clips to install the hood to radiator seal.
      GTY541152Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals