LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Engine Control System (T24A-FTS) - Diagnostic Codes (06 Of 11)) >> SFI System >> DTC P0505-00: Idle Control System [11/2023 - ] >> Procedure

DTC P0505-00: Idle Control System [11/2023 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0505-00) 
    1. Read the DTCs.

      Powertrain > Engine > Trouble Codes 

      Result

      Result Proceed to
      DTC P0505-00 is output A
      DTC P0505-00 and other DTCs are output B

      HINT: 

      If any DTCs other than P0505-00 are output, troubleshoot those DTCs first.

    Result: 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [11/2023 - ] 

    Result: 

    See step  2

  2. CHECK PCV VALVE AND HOSE CONNECTIONS 
    GTY1108210Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Check the PCV hose connections.
    2. Check the PCV valve.

      Refer to INSPECTION [10/2022 - ]

      OK

      PCV hose and PCV valve are connected correctly and are not damaged.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    REPAIR OR REPLACE PCV VALVE OR HOSE 

    Result: 

    OK 

    See step  3

  3. CHECK INTAKE SYSTEM 
    1. Check the intake system for vacuum leaks.

      Refer to PROCEDURE - Step 1

      OK

      No leaks from the intake system.

      HINT: 

      Perform "Inspection After Repair" after repairing or replacing the intake system.

      Refer to INITIALIZATION [10/2022 - ]

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    REPAIR OR REPLACE INTAKE SYSTEM 

    Result: 

    OK 

    See step  4

  4. INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY (THROTTLE VALVE) 
    1. Check the throttle body with motor assembly condition.

      OK

      Throttle valve is not contaminated with foreign matter and moves smoothly.

      HINT: 

      Perform "Inspection After Repair" after replacing the throttle body with motor assembly.

      Refer to INITIALIZATION [10/2022 - ]

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    REPLACE THROTTLE BODY WITH MOTOR ASSEMBLY 

    Refer to REMOVAL [10/2022 - ]

    Result: 

    OK 

    See step  5

  5. CLEAR DTC 
    1. Clear the DTCs.

      Powertrain > Engine > Clear DTCs 

    2. Turn the ignition switch off and wait for at least 30 seconds.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  6

  6. CONFIRM WHETHER DTC OUTPUT RECURS (DTC P0505-00) 
    1. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
    2. Read the pending DTCs.

      Powertrain > Engine > Trouble Codes 

      Result

      Result Proceed to
      DTCs are not output A
      DTC P0505-00 is output B

    Result: 

    END 

    Result: 

    REPLACE ECM 

    Refer to REMOVAL [11/2023 - ]