LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine Intake System (T24A-FTS) - Inspection) >> Intake System >> On-Vehicle Inspection [10/2022 - ] >> Procedure

On-Vehicle Inspection [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT INTAKE SYSTEM 

    HINT: 

    Perform "Inspection After Repair" after repairing vacuum leaks in the intake system.

    Refer to INITIALIZATION [10/2022 - ]

    1. Check that there are no vacuum leaks at the points shown in the illustration.
      GTY1079141Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. PERFORM INITIALIZATION 
    1. Perform "Inspection After Repair" after repairing vacuum leaks in the intake system.

      Refer to INITIALIZATION [10/2022 - ]

scientia non olet · About LEMON Manuals