LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Fuel System (3UR-FBE) (Service Information)) >> FUEL PRESSURE REGULATOR (for High Pressure) >> Removal [08/2015 - 08/2018] >> Procedure

Removal [08/2015 - 08/2018]: Procedure

WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCHARGE FUEL SYSTEM PRESSURE 
    1. Discharge the fuel system pressure (Refer to PRECAUTION [08/2015 - 08/2018] ).
  2. REMOVE V-BANK COVER 

    Refer to PROCEDURE - Step 2

  3. REMOVE AIR CLEANER HOSE ASSEMBLY 

    Refer to PROCEDURE - Step 3

  4. REMOVE NO. 2 FUEL TUBE SUB-ASSEMBLY 

    See step  4

  5. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY 
    1. Disconnect the vacuum sensing hose from the fuel pressure regulator.
      GTY604976Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and fuel pressure regulator.
      GTY572057Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the O-ring from the pressure regulator.
scientia non olet · About LEMON Manuals