LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (3UR-FE) - (Service Information) >> Ignition Coil And Spark Plug >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

  2. REMOVE AIR CLEANER HOSE ASSEMBLY 

    Refer to PROCEDURE - Step 3

  3. REMOVE IGNITION COIL ASSEMBLY 
    1. Disconnect the 8 ignition coil connectors.
      GTY547907Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 8 bolts and 8 ignition coils.
  4. REMOVE SPARK PLUG 
    1. Using a 16 mm plug wrench, remove the 8 spark plugs.
scientia non olet · About LEMON Manuals