Removal [06/2015 - ]: Procedure
- REMOVE LUGGAGE COMPARTMENT DOOR COVER
Refer to PROCEDURE - Step 4
- REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY
Refer to PROCEDURE - Step 8
- REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY
- Disengage the luggage door lock control cable sub-assembly from the clamp.
- Disengage the claws to open the cover as shown in the illustration.
Remove in this Direction - Disengage the claw and guide to remove the luggage door lock protector.
- Disconnect the connector.
- Remove the 2 bolts and luggage compartment door lock assembly.
- Disengage the luggage door lock control cable sub-assembly from the clamp.
- REMOVE LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY