LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> RAV4 LE, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Case (Service Information) >> Transfer Assembly >> Installation [12/2012 - ] >> Procedure

Installation [12/2012 - ]: Procedure

  1. INSTALL TRANSFER AND TRANSAXLE SETTING STUD BOLT 

    Refer to PROCEDURE - Step 10 Refer to PROCEDURE - Step 10

  2. INSTALL TRANSFER ASSEMBLY 
    1. Clean the bolt holes.
      GTY425499Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the transfer to the transaxle with the 6 nuts and 2 bolts.

      Torque: 68.6 N*m (700 kgf*cm, 51 ft.*lbf) 

  3. INSTALL REAR ENGINE MOUNTING BRACKET 

    Refer to PROCEDURE - Step 7 Refer to PROCEDURE - Step 7

  4. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY 

    Refer to INSTALLATION [12/2012 - 08/2017] Refer to INSTALLATION [08/2017 - ]

  5. ADD TRANSFER OIL 

    See step  2

  6. INSPECT TRANSFER OIL 

    See step  1

scientia non olet · About LEMON Manuals