LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Prius C One >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belts (Service Information) >> Rear Seat Outer Belt Assembly >> Removal [11/2015 - 06/2017] >> Procedure

Removal [11/2015 - 06/2017]: Procedure

  1. REMOVE REAR SEAT HEADREST ASSEMBLY 
  2. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY 
  3. REMOVE FRONT FLOOR COVER RH 

    Refer to PROCEDURE - Step 3

  4. REMOVE FRONT FLOOR COVER LH 

    Refer to PROCEDURE - Step 4

  5. REMOVE FRONT CENTER FLOOR COVER 

    Refer to PROCEDURE - Step 5

  6. REMOVE REAR SEAT CUSHION ASSEMBLY (for Bench Type Seatback) 

    Refer to PROCEDURE - Step 7

  7. REMOVE REAR SEATBACK ASSEMBLY (for Bench Type Seatback) 

    Refer to PROCEDURE - Step 6

  8. REMOVE REAR SEAT CUSHION ASSEMBLY (for Separate Type Seatback) 

    Refer to PROCEDURE - Step 8

  9. REMOVE REAR SEATBACK ASSEMBLY RH (for Separate Type Seatback) 

    Refer to PROCEDURE - Step 6

  10. REMOVE REAR SEATBACK ASSEMBLY LH (for Separate Type Seatback) 

    Refer to PROCEDURE - Step 7

  11. REMOVE REAR DOOR SCUFF PLATE 

    Refer to PROCEDURE - Step 11

  12. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP 

    Refer to PROCEDURE - Step 16

  13. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim) 

    Refer to PROCEDURE - Step 33

  14. REMOVE REAR FLOOR MAT ASSEMBLY 

    Refer to PROCEDURE - Step 31

  15. REMOVE SPARE WHEEL CUSHION 

    Refer to PROCEDURE - Step 32

  16. REMOVE REAR DECK TRIM COVER 

    Refer to PROCEDURE - Step 34

  17. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY 
    1. Remove the bolt.
    2. Disengage the 2 claws and disconnect the floor anchor of the rear seat 3 point type outer belt assembly.
      GTY327198Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. REMOVE REAR ABSORBER CAP (w/ Package Tray Trim) 

    Refer to PROCEDURE - Step 36

  19. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (w/ Package Tray Trim) 

    for LH Side: (Refer to PROCEDURE - Step 1 )

  20. REMOVE DECK TRIM SIDE PANEL ASSEMBLY (w/o Package Tray Trim) 

    Refer to PROCEDURE - Step 38

  21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY (w/ Package Tray Trim) 

    Refer to PROCEDURE - Step 39

  22. DISCONNECT REAR CENTER SEAT LAP TYPE BELT ASSEMBLY (for RH Side) 

    See step  19

  23. REMOVE ROOF SIDE INNER GARNISH LH (for LH Side) 

    Refer to PROCEDURE - Step 40

  24. REMOVE ROOF SIDE INNER GARNISH RH (for RH Side) 

    Refer to PROCEDURE - Step 45

  25. REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY 
    1. Remove the bolt and disconnect the shoulder anchor of the rear seat 3 point type outer belt assembly.
      GTY328974Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt.
      GTY328973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 2 guides and remove the rear seat 3 point type outer belt assembly.
scientia non olet · About LEMON Manuals