LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Video System (Service Information) (Except Hybrid) >> Satellite Radio Tuner >> Removal [12/2013 - ] >> Procedure

Removal [12/2013 - ]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Navigation Receiver Type) 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [12/2013 - 11/2016] , or refer to INITIALIZATION [11/2016 - ]

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL WITH AIR CONDITIONING CONTROL ASSEMBLY 

    Refer to PROCEDURE - Step 23

  3. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL 

    Refer to PROCEDURE - Step 24

  4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY 

    Refer to PROCEDURE - Step 25

  5. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY 

    Refer to PROCEDURE - Step 26

  6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type) 

    See step  5

  7. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type) 

    Refer to PROCEDURE - Step 6

  8. REMOVE STEREO COMPONENT TUNER ASSEMBLY WITH WIRE 
    1. Disconnect the 3 connectors.
      GTY431942Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws.
      GTY431932Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 2 screws to remove the stereo component tuner assembly with wire.
      GTY431943Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE NAVIGATION WIRE 
    1. Disconnect the 3 connectors to remove the navigation wire.
      GTY431940Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE STEREO COMPONENT TUNER ASSEMBLY 
scientia non olet · About LEMON Manuals