LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Automatic Transmission System (UB80F) - Service Information (1 Of 2) (Except Hybrid)) >> Combination Switch >> Removal [03/2020 - ] >> Procedure

Removal [03/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Toyota Camry, 2023 Toyota Camry, 2022 Toyota Camry, 2021 Toyota Camry, and 2020 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECAUTION 

    Refer to PRECAUTION [06/2017 - ]

  2. REMOVE NO. 1 METER HOOD CLUSTER 

    Refer to PROCEDURE - Step 1

  3. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

  4. REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH 

    Refer to PROCEDURE - Step 3

  5. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 4

  6. REMOVE SHIFT LOCK RELEASE BUTTON COVER 

    See step  2

  7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    See step  1

  8. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 7

  9. REMOVE COMBINATION SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) 

    Refer to PROCEDURE - Step 3

scientia non olet · About LEMON Manuals