LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Prius C Three >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System (Service Information) >> Room Temperature Sensor >> Removal [11/2015 - 06/2017] >> Procedure

Removal [11/2015 - 06/2017]: Procedure

  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  2. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY 

    Refer to PROCEDURE - Step 5

  3. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH 

    Refer to PROCEDURE - Step 6

  4. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL GARNISH 

    Refer to PROCEDURE - Step 10

  5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY 

    See step  5

  6. REMOVE ROOM TEMPERATURE SENSOR (COOLER THERMISTOR) 
    1. Insert a screwdriver into the position shown in the illustration to disengage the 2 claws.
      GTY343800Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector and aspirator and remove the room temperature sensor (cooler thermistor).
      GTY343801Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals