ECM Power Source Circuit [12/2013 - 11/2016]: Description
WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
When the ignition switch is turned to ON, battery voltage is applied to the IGSW terminal of the ECM. The output signal from the MREL terminal of the ECM causes current to flow to the coil of the semiconductor pwr integration ECU (EFI MAIN relay), closing the contacts of the EFI MAIN relay and supplying power to terminals +B and +B2 of the ECM.