LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats (Service Information) (Except Hybrid) (2 Of 2) >> Seat Variable Cushion Switch >> Installation [12/2013 - ] >> Procedure

Installation [12/2013 - ]: Procedure

  1. INSTALL SEAT VARIABLE CUSHION SWITCH 
    1. Install the seat variable cushion switch to the front seat cushion shield with the 2 screws.
      GTY429733Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT SEAT CUSHION SHIELD 

    Refer to PROCEDURE - Step 35 , or refer to PROCEDURE - Step 35 , or refer to PROCEDURE - Step 38

  3. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/o Climate Control Seat System) 

    Refer to PROCEDURE - Step 39 , or refer to PROCEDURE - Step 39 , or refer to PROCEDURE - Step 42

  4. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/ Climate Control Seat System) 

    Refer to PROCEDURE - Step 40 , or refer to PROCEDURE - Step 40 , or refer to PROCEDURE - Step 43

  5. INSTALL FRONT SEAT ASSEMBLY (for Driver Side) 

    Refer to INSTALLATION [12/2013 - ]

scientia non olet · About LEMON Manuals