LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats (Service Information) (Except Hybrid) (2 Of 2) >> Lumbar Switch >> Installation [12/2013 - ] >> Procedure

Installation [12/2013 - ]: Procedure

  1. INSTALL FRONT LUMBAR POWER SEAT SWITCH 
    1. Engage the 4 claws to install the front lumbar power seat switch to the front seat cushion shield.
      GTY451689Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Seat Position Memory System) 

    Refer to PROCEDURE - Step 1 , or refer to PROCEDURE - Step 1

  3. INSTALL RECLINING POWER SEAT SWITCH KNOB (w/ Seat Position Memory System) 

    Refer to PROCEDURE - Step 32 , or refer to PROCEDURE - Step 32 , or refer to PROCEDURE - Step 35

  4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (w/ Seat Position Memory System) 

    Refer to PROCEDURE - Step 33 , or refer to PROCEDURE - Step 33 , or refer to PROCEDURE - Step 36

  5. INSTALL FRONT SEAT CUSHION SHIELD 

    Refer to PROCEDURE - Step 35 , or refer to PROCEDURE - Step 35 , or refer to PROCEDURE - Step 38

  6. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/o Climate Control Seat System) 

    Refer to PROCEDURE - Step 39 , or refer to PROCEDURE - Step 39 , or refer to PROCEDURE - Step 42

  7. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/ Climate Control Seat System) 

    Refer to PROCEDURE - Step 40 , or refer to PROCEDURE - Step 40 , or refer to PROCEDURE - Step 43

  8. INSTALL FRONT SEAT ASSEMBLY (for Driver Side) 

    Refer to INSTALLATION [12/2013 - ]

scientia non olet · About LEMON Manuals