LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Avalon XLE Plus >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension (Service Information) (Except Hybrid) >> REAR LOWER ARM (for No. 2 Arm) >> Removal [10/2014 - ] >> Procedure

Removal [10/2014 - ]: Procedure

  1. REMOVE REAR WHEEL 
  2. REMOVE CENTER EXHAUST PIPE ASSEMBLY 

    (Refer to REMOVAL [10/2014 - ] )

  3. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (w/ Height Control Sensor) 

    (Refer to REMOVAL [10/2014 - ] )

    HINT: 

    It is necessary to remove the rear height control sensor sub-assembly when separating the rear No. 2 suspension arm assembly RH.

  4. SEPARATE REAR NO. 2 SUSPENSION ARM ASSEMBLY 

    Refer to PROCEDURE - Step 9

  5. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY 
    1. Remove the bolt and rear No. 2 suspension arm assembly from the rear suspension member sub-assembly.
      GTY562959Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
scientia non olet · About LEMON Manuals