Removal [10/2015 - ]: Procedure

Refer to PROCEDURE - Step 1

Refer to PROCEDURE - Step 2

1. Using a T20 "TORX" socket wrench, remove the screw.

   Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2. Slide the inner rear view mirror assembly as shown in the illustration to remove it.

1. w/o Toyota Safety Sense P:
   1. Disengage the 2 claws and slide the inner rear view mirror stay holder cover as shown in the illustration.

      Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

   2. Disengage the 2 claws to remove the inner rear view mirror stay holder cover.

      Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

1. w/o Toyota Safety Sense P:
   1. Disconnect the connector.

      Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

   2. Using a T20 "TORX" socket wrench, remove the screw.
   3. Slide the inner rear view mirror assembly as shown in the illustration to remove it.

      Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2. w/ Toyota Safety Sense P:
   1. Disconnect the connector.

      Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

   2. Disengage the clamp.

      Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

   3. Using a T20 "TORX" socket wrench, remove the screw.

      Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

   4. Slide the inner rear view mirror assembly as shown in the illustration to remove it.