LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Avalon XLE Plus >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent System / Keyless Entry System (Service Information) (Except Hybrid) >> Certification Ecu >> Removal [10/2015 - ] >> Procedure

Removal [10/2015 - ]: Procedure

  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    (Refer to REMOVAL [10/2014 - ] )

  2. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 37

  3. REMOVE ECU INTEGRATION BOX RH (w/ ECU Integration Box RH) 
    1. Disconnect each connector.
    2. Disengage the clamp.
      GTY383188Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
    3. Remove the bolt, 2 nuts and ECU integration box RH.
  4. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/ ECU Integration Box RH) 
    1. Disengage the 2 claws and remove the certification ECU (smart key ECU assembly) as shown in the illustration.
      GTY361747Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
  5. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/o ECU Integration Box RH) 
    1. Disconnect each connector.
    2. Remove the bolt, nut and certification ECU (smart key ECU assembly).
      GTY361746Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
scientia non olet · About LEMON Manuals