LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Avalon XLE Plus >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Video System (Service Information) (Except Hybrid) >> Radio Receiver >> Installation [10/2014 - ] >> Procedure

Installation [10/2014 - ]: Procedure

  1. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY 
  2. INSTALL STEREO COMPONENT TUNER ASSEMBLY (w/ Satellite Radio) 
  3. INSTALL NO. 1 NAVIGATION WIRE (w/ Satellite Radio) 

    See step  2

  4. INSTALL AIR CONDITIONING CONTROL ASSEMBLY 

    Refer to PROCEDURE - Step 1

  5. INSTALL NO. 2 RADIO RECEIVER BRACKET 
    1. w/o Satellite Radio:
      1. Install the No. 2 radio receiver bracket with the 4 screws.
    2. w/ Satellite Radio:
      1. Install the No. 2 radio receiver bracket with the 6 screws.
  6. INSTALL NO. 1 RADIO RECEIVER BRACKET 
    1. w/o Satellite Radio:
      1. Install the No. 1 radio receiver bracket with the 4 screws.
    2. w/ Satellite Radio:
      1. Install the No. 1 radio receiver bracket with the 6 screws.
  7. INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL 
    1. Engage the clip.
    2. Install the center upper instrument cluster finish panel with the 2 screws.
  8. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY 
    1. Connect each connector.
    2. Engage the 4 clips to temporarily install the radio and display receiver assembly with air conditioning control assembly.
    3. Connect the connector.
    4. Install the radio and display receiver assembly with air conditioning control assembly with the 4 bolts.
  9. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 5

  10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 8 Refer to PROCEDURE - Step 8

scientia non olet · About LEMON Manuals