LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> 4Runner TRD Pro >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Transfer Case (VF2CM) - Service Information) >> 4WD Control Ecu >> Installation [08/2019 - ] >> Procedure

Installation [08/2019 - ]: Procedure

WARNING: This page is about a different car, the 2024 Toyota 4Runner, 2023 Toyota 4Runner, 2022 Toyota 4Runner, 2021 Toyota 4Runner, and 2020 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FOUR WHEEL DRIVE CONTROL ECU 
    1. Install the four wheel drive control ECU with the bolt.

      Torque: 13 N.m (127 kgf/cm, 9 ft.lbf) 

    2. Connect the 2 connectors.
  2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 13 [08/2019 - 08/2022] , or refer to PROCEDURE - Step 13 [08/2022 - ]

  3. INSTALL INSTRUMENT PANEL BOX DOOR COVER 

    Refer to PROCEDURE - Step 14 [08/2019 - 08/2022] , or refer to PROCEDURE - Step 14 [08/2022 - ]

  4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    Refer to PROCEDURE - Step 1

  5. INSTALL LOWER INSTRUMENT COVER LH 

    Refer to PROCEDURE - Step 16 [08/2019 - 08/2022] , or refer to PROCEDURE - Step 16 [08/2022 - ]

  6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 17 [08/2019 - 08/2022] , or refer to PROCEDURE - Step 17 [08/2022 - ]

  7. INSTALL COWL SIDE TRIM BOARD RH 

    Refer to PROCEDURE - Step 31 [08/2019 - 08/2022] , or refer to PROCEDURE - Step 31 [08/2022 - ]

  8. INSTALL DOOR SCUFF PLATE ASSEMBLY RH 

    Refer to PROCEDURE - Step 33 [08/2019 - 08/2022] , or refer to PROCEDURE - Step 33 [08/2022 - ]

  9. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH 

    Refer to PROCEDURE - Step 3

scientia non olet · About LEMON Manuals