LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> RAV4 SE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission (U760E) - Service Information (1 Of 2)) >> Combination Switch >> Removal [12/2012 - 10/2015] >> Procedure

Removal [12/2012 - 10/2015]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

  3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 3

  4. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 8

  5. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 6

  6. REMOVE COMBINATION SWITCH ASSEMBLY 
    1. Detach the 2 claws and remove the combination switch assembly.
      GTY377489Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals