LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> RAV4 Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer Case (Service Information)) >> 4WD Control Switch >> Installation [12/2012 - ] >> Procedure

Installation [12/2012 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL DIFFERENTIAL LOCK SWITCH 
    1. Connect the connector.
    2. Attach the 2 claws to install the differential lock switch.
  2. INSTALL NO. 2 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 7 Refer to PROCEDURE - Step 6

scientia non olet · About LEMON Manuals