LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> RAV4 Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Panels / Trim (Service Information) (Except Hybrid) >> Lower Instrument Panel >> Reassembly [10/2015 - ] >> Procedure

Reassembly [10/2015 - ]: Procedure

  1. INSTALL ANTENNA CORD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  2. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Smart Entry and Start System) 

    Refer to PROCEDURE - Step 1

  3. INSTALL DOOR CONTROL SWITCH ASSEMBLY (w/ Power Back Door) 

    Refer to PROCEDURE - Step 1

  4. INSTALL DIFFERENTIAL LOCK SWITCH (for AWD) 

    Refer to PROCEDURE - Step 1

  5. INSTALL SPARE SWITCH HOLE COVER 

    HINT: 

    Use the same procedure for all the spare switch hole covers.

    1. Attach the 2 claws to install the spare switch hole cover.
  6. INSTALL NO. 2 SWITCH HOLE BASE 
    1. Attach the claw and 3 clips to install the No. 2 switch hole base.
  7. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY 
    1. Attach the clip to install the glove compartment door stopper sub-assembly.
scientia non olet · About LEMON Manuals