Installation [11/2015 - ]: Procedure

INSTALL BATTERY COOLING BLOWER ASSEMBLY
1. Engage the 2 claws.
2. Install the battery cooling blower assembly with the 3 bolts.
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
  NOTE:
  - Be sure not to touch the fan part of the battery cooling blower assembly.
  - Do not lift the battery cooling blower assembly using the wire harness.
3. Engage the 2 clamps.
4. Connect the battery cooling blower assembly connector.
INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY
- for NICKEL METAL HYDRIDE BATTERY:
  Refer to PROCEDURE - Step 16 [11/2015 - 12/2018] Refer to PROCEDURE - Step 16 [12/2018 - ]
- for LITHIUM-ION BATTERY:
  Refer to PROCEDURE - Step 10
INSTALL REAR UNDER COVER
- for NICKEL METAL HYDRIDE BATTERY:
  Refer to PROCEDURE - Step 17 [11/2015 - 12/2018] Refer to PROCEDURE - Step 17 [12/2018 - ]
- for LITHIUM-ION BATTERY:
  Refer to PROCEDURE - Step 11
INSTALL REAR UNDER SIDE COVER LH
Refer to PROCEDURE - Step 30 [11/2015 - 12/2018] Refer to PROCEDURE - Step 28 [12/2018 - 07/2020] Refer to PROCEDURE - Step 27 [07/2020 -]
INSTALL REAR DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 47 [11/2015 - 12/2018] Refer to PROCEDURE - Step 43 [12/2018 - 07/2020] Refer to PROCEDURE - Step 43 [07/2020 -]
INSTALL REAR UNDER SIDE COVER RH
HINT:

Use the same procedure as for the LH side.
INSTALL REAR DOOR SCUFF PLATE RH
HINT:

Use the same procedure as for the LH side.
INSTALL REAR SEAT CUSHION LOCK HOOK
Refer to PROCEDURE - Step 1
INSTALL REAR SEAT CUSHION ASSEMBLY
Refer to PROCEDURE - Step 2