Installation [02/2014 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for Center) NOTE:
Do not touch the speaker cone.
- Connect the connector.
- Install the front No. 3 speaker assembly with the 2 screws.
- INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY (for Center)
Refer to PROCEDURE - Step 30
- INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for Side) NOTE:
Do not touch the speaker cone.
HINT:
Use the same procedure for the RH side and LH side.
- Connect the connector.
- Install the front No. 2 speaker assembly with the 2 screws.
- INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for Side)
Refer to PROCEDURE - Step 37