LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock System (Service Information) (Hybrid) >> Back Door Lock >> Removal [02/2014 - 11/2016] >> Procedure

Removal [02/2014 - 11/2016]: Procedure

  1. REMOVE BACK WINDOW UPPER TRIM PANEL 

    Refer to PROCEDURE - Step 1

  2. REMOVE BACK DOOR TRIM COVER LH 

    Refer to PROCEDURE - Step 2

  3. REMOVE BACK DOOR TRIM COVER RH 

    HINT: 

    Use the same procedure as for the LH side.

  4. REMOVE BACK DOOR LOCK COVER 

    Refer to PROCEDURE - Step 4

  5. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER 

    Refer to PROCEDURE - Step 5

  6. REMOVE NO. 1 BACK DOOR SERVICE HOLE COVER 

    Refer to PROCEDURE - Step 6

  7. REMOVE BACK DOOR TRIM PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 7

  8. REMOVE BACK DOOR LOCK ASSEMBLY 
    1. Disconnect the connector.
      GTY423321Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp.
    3. Remove the 4 bolts and back door lock assembly.
scientia non olet · About LEMON Manuals