Installation [10/2014 - ]: Procedure
- INSTALL SEAT HEATER ASSEMBLY
- Using a tacker, install the seat heater assembly to the bench type rear seatback cover with 6 new tag pins.
HINT:
Use the same procedure for both the RH side and LH side.
- Using a tacker, install the seat heater assembly to the bench type rear seatback cover with 6 new tag pins.
- INSTALL BENCH TYPE REAR SEATBACK COVER
- INSTALL REAR SEAT HEADREST SUPPORT (for LH Side)
- INSTALL REAR SEAT HEADREST SUPPORT (for RH Side)
- INSTALL REAR SEAT SHOULDER BELT GUIDE LH (for LH Side)
- INSTALL REAR SEAT SHOULDER BELT GUIDE LH (for Center)
- INSTALL REAR SEAT SHOULDER BELT GUIDE RH
- INSTALL REAR SEAT AIRBAG ASSEMBLY LH
Refer to PROCEDURE - Step 1
- INSTALL REAR SEAT AIRBAG ASSEMBLY RH
- INSTALL REAR CENTER SEAT ARMREST ASSEMBLY WITH BOX
- INSTALL REAR SEATBACK ASSEMBLY
See step 1
- INSTALL REAR SEAT CUSHION ASSEMBLY
See step 3
- INSTALL REAR SEAT HEADREST ASSEMBLY
- CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
- INSTALL LUGGAGE TRIM SERVICE HOLE COVER
Refer to PROCEDURE - Step 3
- INSPECT SRS WARNING LIGHT
(Refer to DIAGNOSIS SYSTEM [10/2014 - ] )