LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (SFI System [1AR-FE] - Diagnostic Codes - (Except Hybrid) (5 Of 8)) >> SFI System >> DTC P2014: Intake Manifold Runner Position Sensor / Switch Circuit (Bank 1); DTC P2016: Intake Manifold Runner Position Sensor / Switch Circuit Low (Bank 1); DTC P2017: Intake Manifold Runner Position Sensor / Switch Circuit High (Bank 1) [11/2016 - ] >> Monitor Strategy

Monitor Strategy

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
Related DTCs P2014: Tumble control valve position sensor range check (chattering)
P2016: Tumble control valve position sensor range check (low voltage)
P2017: Tumble control valve position sensor range check (high voltage)
Required Sensors/Components (Main) Intake air control valve actuator (for tumble control valve)
Required Sensors/Components (Related) -
Frequency of Operation Continuous
Duration 0.5 seconds
MIL Operation Immediate
Sequence Operation None
scientia non olet · About LEMON Manuals