LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (SFI System [1AR-FE] - Diagnostic Codes - (Except Hybrid) (5 Of 8)) >> SFI System >> DTC P0101: Mass Air Flow Circuit Range / Performance Problem [10/2017 - ] >> Description

DTC P0101: Mass Air Flow Circuit Range / Performance Problem [10/2017 - ]: Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0102.

Refer to DESCRIPTION .

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P0101 Mass Air Flow Circuit Range / Performance Problem All of the following conditions are met (2 trip detection logic):
(a) The engine is running.
(b) The engine coolant temperature is 70°C (158°F) or higher.
(c) The throttle position sensor voltage is 0.2 V or higher, and less than 2 V.
(d) Average engine load value ratio is less than 0.83, or higher than 1.15 (varies with estimated engine load).
Average engine load value ratio = Average engine load based on mass air flow meter sub-assembly output / Average engine load estimated from driving conditions
(e) Average air fuel ratio is less than -20%, or higher than 20%
  • Mass air flow meter sub-assembly
  • Intake system
  • PCV hose connections
Comes on DTC stored