DTC P0011: Camshaft Position "A" - Timing Over-Advanced or System Performance (Bank 1); DTC P0012: Camshaft Position "A" - Timing Over-Retarded (Bank 1): Description

Refer to DTC P0010. Refer to DESCRIPTION .

DTC No.	DTC Detection Condition	Trouble Area
P0011	Valve timing is stuck at a certain value when in the advance range (1 trip detection logic)	Valve timing Camshaft timing oil control valve assembly (for intake camshaft) Oil control valve filter Camshaft timing gear assembly (for intake camshaft) ECM
P0012	Valve timing is stuck at a certain value when in the retard range (2 trip detection logic)