Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
ALL
| Monitor runs whenever following DTCs are not present | None |
CASE 1
| Ignition switch | ON |
| Engine | Running |
| Battery voltage | 8 V or more |
| Starter | Off |
| CPU clock elapsed time | 10 minutes or more |
CASE 2
| Internal engine off timer (elapsed time from engine stop) | Less than 30 minutes |
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | Off |
CASE 3
| Internal engine off timer (elapsed time from engine stop) | 40 minutes or more |
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | Off |