Monitor Strategy
WARNING: This page is about a different variant/trim than selected.
| Related DTCs | P2009: DC Motor for Tumble Control Valve Range Check (Low Current) P2010: DC Motor for Tumble Control Valve Range Check (High Current) |
| Required Sensors/Components (Main) | Tumble control valve (actuator) |
| Required Sensors/Components (Related) | None |
| Frequency of Operation | Continuous |
| Duration | DC motor for tumble control valve range check (low current): 1 second DC motor for tumble control valve range check (high current): 6 times |
| MIL Operation | Immediate |
| Sequence Operation | None |