DTC P2009: Intake Manifold Runner Control Circuit Low (Bank 1); DTC P2010: Intake Manifold Runner Control Circuit High (Bank 1): Description
WARNING: This page is about a different variant/trim than selected.
The ECM activates the DC motor for the tumble control valve, which opens and closes the tumble control valve. The ECM activates the DC motor based on engine speed, coolant temperature, intake air temperature and other conditions.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P2009 | Both of the following conditions continue for 1 second (1 trip detection logic): (a) The output duty of the DC motor for the tumble control valve is 100%. (b) The current of the DC motor for the tumble control valve is below 0.35 A. |
|
| P2010 | Either of the following conditions continues for 6 times or more (1 trip detection logic): (a) The motor drive IC is overcurrent. (b) The motor drive IC overheats. |