Tire Pressure Warning Ecu: Installation

INSTALL TIRE PRESSURE WARNING ECU
1. Connect the connector to the tire pressure warning ECU.
  
  Fig 1: Locating Tire Pressure Warning ECU Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the tire pressure warning ECU with the screw.
HINT:

Engage the pin into the hole as shown in the illustration to install the tire pressure warning ECU.

Fig 2: Identifying Tire Pressure Warning ECU Screw
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CONDITIONING PANEL ASSEMBLY
HINT:

Refer to the instructions for Installation of the air conditioning panel (See INSTALLATION ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
REGISTER TRANSMITTER ID
HINT:

It is necessary to register all transmitter IDs (See REGISTRATION ).
INSPECT TIRE PRESSURE WARNING SYSTEM (See TEST MODE PROCEDURE )
INITIALIZE SYSTEM (See INITIALIZATION )

NOTE:

Be sure to register the transmitter IDs of all tires in the ECU before initialization.
Be sure to inflate all tires to the proper inflation pressure before initialization.