Air Cooled Oil Cooler: Removal

REMOVE FRONT BUMPER ASSEMBLY
HINT:

(See REMOVAL )
DRAIN AUTOMATIC TRANSAXLE FLUID
1. Remove the drain plug and the gasket, and drain ATF.
2. Install a new gasket and the drain plug.
  Torque: 49 N*m (500 kgf*cm, 36 ft.*lbf)
REMOVE OIL WITH HOSE COOLER ASSEMBLY
1. Remove the 2 hose clamps and disconnect the 2 oil cooler hoses.
2. Remove the bolt, nut, and the oil with hose cooler assembly.
  
  Fig 1: Locating Hose Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002