LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension (Except Hybrid) >> Front Lower Suspension Arm >> Removal

Front Lower Suspension Arm: Removal

  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE 

    HINT:

    • Refer to the procedure up to Remove Engine Assembly with Transaxle (for 2GR-FE) (See REMOVAL ).
    • Refer to the procedure up to Remove Engine Assembly with Transaxle (for 1AR-FE) (See REMOVAL ).
  2. REMOVE NO. 1 FRONT STABILIZER BRACKET LH  (See REMOVAL )
  3. REMOVE NO. 1 FRONT STABILIZER BRACKET RH 

    HINT:

    Perform the same procedure as the LH side.

  4. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY 
  5. REMOVE POWER STEERING LINK ASSEMBLY  (See REMOVAL )
  6. INSTALL ENGINE HANGERS (for 2GR-FE)  (See REMOVAL )
  7. INSTALL ENGINE HANGERS (for 1AR-FE)  (See REMOVAL )
  8. REMOVE FRONT FRAME ASSEMBLY (for 2GR-FE)  (See REMOVAL )
  9. REMOVE FRONT FRAME ASSEMBLY (for 1AR-FE)  (See REMOVAL )
  10. REMOVE FRONT LOWER SUSPENSION ARM 
    1. Remove the 3 bolts, nut, and the front lower suspension arm from the front frame assembly.
    2. Remove the front lower arm bushing stopper from the front lower suspension arm.
scientia non olet · About LEMON Manuals