Water Pump: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL WATER PUMP ASSEMBLY
1. Install a new gasket and the water pump with the 7 bolts.
  Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
Fig 1: Locating Bolts And Water Pump
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL V-RIBBED BELT TENSIONER ASSEMBLY (See REASSEMBLY )
INSTALL GENERATOR ASSEMBLY (See INSTALLATION )
INSTALL V-RIBBED BELT
HINT:

See INSTALLATION
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
ADD ENGINE COOLANT (See COOLANT )
INSPECT FOR COOLANT LEAK (See COOLING SYSTEM )
INSTALL NO. 1 ENGINE UNDER COVER