Cooling Fan Motor: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL NO. 2 COOLING FAN MOTOR
1. Install the fan motor with the 3 screws.
  Torque: w/o Towing package
  
  2.6 N*m (27 kgf*cm, 23 in.*lbf)
  
  w/ Towing package
  
  3.9 N*m (40 kgf*cm, 35 in.*lbf)
Fig 1: Locating Screws And Fan Motor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 COOLING FAN MOTOR
1. Install the fan motor with the 3 screws.
  Torque: w/o Towing package
  
  2.6 N*m (27 kgf*cm, 23 in.*lbf)
  
  w/ Towing package
  
  3.9 N*m (40 kgf*cm, 35 in.*lbf)
Fig 2: Locating Screws And Fan Motor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT COOLING FAN MOTOR CONNECTORS
1. Connect the 2 cooling fan motor connectors.
Fig 3: Locating Cooling Fan Motor Connectors
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL COOLING FAN MOTOR INSULATOR
1. Install the cooling fan motor insulator with the 3 screws.
  Torque: 2.6 N*m (27 kgf*cm, 23 in.*lbf)
Fig 4: Locating Cooling Fan Motor Insulator And Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FAN
1. Install the 2 fans with the 2 nuts.
  Torque: 6.3 N*m (64 kgf*cm, 56 in.*lbf)
INSTALL FAN ASSEMBLY WITH MOTOR (See INSTALLATION )
INSTALL RADIATOR ASSEMBLY AND FAN ASSEMBLY WITH MOTOR
HINT:

See INSTALLATION

Fig 5: Locating Nuts And Fans