TIRE PRESSURE WARNING RECEIVER (w/ Antenna): Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
REMOVE ROOF HEADLINING ASSEMBLY
HINT:

Refer to the instructions for REMOVAL of the roof headlining (See REMOVAL ).
REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY
1. Remove the bolt.
  
  Fig 1: Identifying Tire Pressure Warning Receiver Assembly Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the connector and remove the tire pressure warning receiver assembly.
Fig 2: Locating Tire Pressure Warning Receiver Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002