LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat (Except Hybrid) >> Seat Variable Cushion Switch >> Installation

Seat Variable Cushion Switch: Installation

  1. INSTALL SEAT VARIABLE CUSHION SWITCH 
    1. Install the seat variable cushion switch with the 2 screws.
    Fig 1: Locating Seat Variable Cushion Switch And Screw
    G05421534Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY  (See INSTALLATION )
  3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB  (See INSTALLATION )
  4. INSTALL RECLINING POWER SEAT SWITCH KNOB  (See INSTALLATION )
  5. INSTALL FRONT SEAT ASSEMBLY  (See INSTALLATION )
  6. INSTALL REAR INNER SEAT TRACK COVER  (See INSTALLATION )
  7. INSTALL REAR OUTER SEAT TRACK COVER  (See INSTALLATION )
  8. INSTALL FRONT INNER SEAT TRACK COVER  (See INSTALLATION )
  9. INSTALL FRONT OUTER SEAT TRACK COVER  (See INSTALLATION )
  10. INSTALL FRONT SEAT HEADREST ASSEMBLY  (See INSTALLATION )
  11. INSPECT FRONT SEAT ASSEMBLY  (See INSTALLATION )
  12. INSPECT SRS WARNING LIGHT 

    (See INSTALLATION )

scientia non olet · About LEMON Manuals