LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat (Except Hybrid) >> Lumbar Support Adjuster Assembly >> Removal

Lumbar Support Adjuster Assembly: Removal

  1. REMOVE FRONT SEAT HEADREST ASSEMBLY  (See REMOVAL )
  2. REMOVE FRONT OUTER SEAT TRACK COVER  (See REMOVAL )
  3. REMOVE FRONT INNER SEAT TRACK COVER  (See REMOVAL )
  4. REMOVE REAR OUTER SEAT TRACK COVER  (See REMOVAL )
  5. REMOVE REAR INNER SEAT TRACK COVER  (See REMOVAL )
  6. REMOVE FRONT SEAT ASSEMBLY  (See REMOVAL )
  7. REMOVE RECLINING POWER SEAT SWITCH KNOB  (See REMOVAL )
  8. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB  (See REMOVAL )
  9. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY  (See REMOVAL )
  10. REMOVE FRONT SEAT INNER BELT ASSEMBLY  (See REMOVAL )
  11. REMOVE FRONT SEAT CUSHION INNER SHIELD  (See DISASSEMBLY )
  12. REMOVE FRONT SEATBACK COVER WITH PAD  (See DISASSEMBLY )
  13. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the 2 screws and the lumbar support adjuster assembly.
    Fig 1: Identifying Lumbar Support Adjuster Assembly And Screws
    G05421554Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals