LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Seat Belt (Except Hybrid) >> Front Seat Inner Belt Assembly >> Removal

Front Seat Inner Belt Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Seat) 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (See AIRBAG SYSTEM ).
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  2. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Manual Seat)  (See REMOVAL )
  3. REMOVE FRONT OUTER SEAT TRACK COVER (for Manual Seat)  (See REMOVAL )
  4. REMOVE FRONT INNER SEAT TRACK COVER (for Manual Seat)  (See REMOVAL )
  5. REMOVE REAR SEAT TRACK COVER (for Manual Seat)  (See REMOVAL )
  6. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)  (See REMOVAL )
  7. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Power Seat)  (See REMOVAL )
  8. REMOVE FRONT OUTER SEAT TRACK COVER (for Power Seat)  (See REMOVAL )
  9. REMOVE FRONT INNER SEAT TRACK COVER (for Power Seat)  (See REMOVAL )
  10. REMOVE REAR OUTER SEAT TRACK COVER (for Power Seat)  (See REMOVAL )
  11. REMOVE REAR INNER SEAT TRACK COVER (for Power Seat)  (See REMOVAL )
  12. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)  (See REMOVAL )
  13. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat) 
    1. Disconnect each connector and clamp.
    2. Remove the nut and the front seat inner belt assembly.
  14. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) 
    1. Disconnect each connector and clamp.
      Fig 1: Identifying Front Seat Inner Belt Assembly Nut
      G05419410Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the nut and the front seat inner belt assembly.
      Fig 2: Identifying Front Seat Inner Belt Assembly Nut
      G05419411Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals