Navigation Receiver: Installation

INSTALL NAVIGATION RECEIVER ASSEMBLY

Fig 1: Locating No. 2 Radio Bracket Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 RADIO BRACKET
1. Install the No. 2 radio bracket with the 6 screws.
Fig 2: Locating No. 2 Radio Bracket Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 RADIO BRACKET
1. Install the No. 1 radio bracket with the 6 screws.
  
  Fig 3: Locating No. 1 Radio Bracket Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the claw and connect the connector.
INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET
1. Connect each connector.
  
  Fig 4: Identifying Connector Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 4 clips.
  
  Fig 5: Identifying Navigation Receiver Assembly With Bracket Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the navigation receiver assembly with bracket with the 4 bolts.
INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System) (See AIR CONDITIONING PANEL (FOR MANUAL AIR CONDITIONING SYSTEM) )
INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System) (See REMOVAL )
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Key System) (See INSTALLATION )
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Key System) (See INSTALLATION )
INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY (See INSTALLATION )

Fig 6: Locating Navigation Receiver Assembly With Bracket Bolts