Stereo Component Amplifier: Installation

INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY
1. Install the stereo component amplifier assembly as shown in the illustration.
2. Install the nut.
  Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
  
  Fig 1: Installing Stereo Component Amplifier Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect each connector.
Fig 2: Locating Stereo Component Amplifier Assembly Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AUDIO AMPLIFIER COVER
1. Install the audio amplifier cover with the 3 clips.
INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).

Fig 3: Identifying Audio Amplifier Cover Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT FRONT SEAT SLIDE ADJUSTER LOCK (for Manual Seat)
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSTALL REAR SEAT TRACK COVER (for Manual Seat)
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSTALL FRONT INNER SEAT TRACK COVER (for Manual Seat)
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSTALL FRONT OUTER SEAT TRACK COVER (for Manual Seat)
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSTALL FRONT SEAT HEADREST ASSEMBLY (for Manual Seat)
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSTALL FRONT SEAT ASSEMBLY (for Power Seat)
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSTALL REAR INNER SEAT TRACK COVER (for Power Seat)
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSTALL REAR OUTER SEAT TRACK COVER (for Power Seat)
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSTALL FRONT INNER SEAT TRACK COVER (for Power Seat)
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSTALL FRONT OUTER SEAT TRACK COVER (for Power Seat)
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSTALL FRONT SEAT HEADREST ASSEMBLY (for Power Seat)
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for Manual Seat)
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
INSPECT FRONT SEAT ASSEMBLY (for Power Seat)
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSPECT SRS WARNING LIGHT
(See DIAGNOSIS SYSTEM )