LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla XLE, 1.8 L >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sliding Roof >> Sliding Roof Housing >> Removal

Sliding Roof Housing: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Seat) 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
  2. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Manual Seat) 
  3. REMOVE OUTER SEAT TRACK COVER LH (for Manual Seat)  (See REMOVAL )
  4. REMOVE INNER SEAT TRACK COVER LH (for Manual Seat)  (See REMOVAL )
  5. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)  (See DISASSEMBLY )
  6. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Power Seat) 
  7. REMOVE OUTER SEAT TRACK COVER LH (for Power Seat)  (See REMOVAL )
  8. REMOVE INNER SEAT TRACK COVER LH (for Power Seat)  (See REMOVAL )
  9. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)  (See REMOVAL )
  10. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Manual Seat) 
  11. REMOVE OUTER SEAT TRACK COVER RH (for Manual Seat) 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  12. REMOVE INNER SEAT TRACK COVER RH (for Manual Seat) 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  13. REMOVE FRONT SEAT ASSEMBLY RH (for Manual Seat) 

    HINT:

    Use the same procedure for the RH side and LH side (See DISASSEMBLY ).

  14. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH  (See REMOVAL )
  15. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH  (See REMOVAL )
  16. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  17. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  18. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  19. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  20. REMOVE INSTRUMENT PANEL BOX ASSEMBLY  (See REMOVAL )
  21. REMOVE FRONT NO. 1 CONSOLE BOX INSERT  (See REMOVAL )
  22. REMOVE FRONT NO. 2 CONSOLE BOX INSERT  (See REMOVAL )
  23. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  24. REMOVE CONSOLE BOX CARPET  (See REMOVAL )
  25. REMOVE CONSOLE BOX ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  26. REMOVE CONSOLE BOX ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  27. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY (for Manual Transaxle) 

    for C59: (See REMOVAL )

    for E351: (See REMOVAL )

  28. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY (for Automatic Transaxle) 

    for U250E: (See REMOVAL )

    for U341E: (See INSPECTION PROCEDURE )

  29. REMOVE SHIFT LEVER ASSEMBLY (for Manual Transaxle) 

    for C59: (See INSTALLATION )

    for E351: (See INSTALLATION )

  30. REMOVE SHIFT LOCK CONTROL UNIT ASSEMBLY (for Automatic Transaxle) 

    for U250E: (See REMOVAL )

    for U341E: (See INSPECTION PROCEDURE )

  31. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  32. REMOVE INSTRUMENT PANEL FINISH PANEL END RH  (See REMOVAL )
  33. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  34. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY  (See REMOVAL )
  35. REMOVE COMBINATION METER ASSEMBLY  (See REMOVAL )
  36. REMOVE FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag)  (See REMOVAL )
  37. REMOVE FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag)  (See REMOVAL )
  38. REMOVE FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag) 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  39. REMOVE FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)  (See REMOVAL )
  40. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY  (See REMOVAL )
  41. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  42. REMOVE COWL SIDE TRIM BOARD LH  (See REMOVAL )
  43. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH  (See REMOVAL )
  44. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY  (See REMOVAL )
  45. REMOVE NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY  (See REMOVAL )
  46. REMOVE FRONT DOOR SCUFF PLATE RH 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  47. REMOVE COWL SIDE TRIM BOARD RH 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  48. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  49. DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY  (See REMOVAL )
  50. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL )
  51. REMOVE REAR DOOR SCUFF PLATE LH  (See REMOVAL )
  52. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH  (See REMOVAL )
  53. REMOVE LAP BELT OUTER ANCHOR COVER (for LH Side)  (See REMOVAL )
  54. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH  (See REMOVAL )
  55. REMOVE LOWER CENTER PILLAR GARNISH LH  (See REMOVAL )
  56. REMOVE UPPER CENTER PILLAR GARNISH LH  (See REMOVAL )
  57. REMOVE REAR DOOR SCUFF PLATE RH 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  58. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  59. REMOVE LAP BELT OUTER ANCHOR COVER (for RH Side)  (See REMOVAL )
  60. REMOVE LOWER CENTER PILLAR GARNISH RH 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  61. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH  (See REMOVAL )
  62. REMOVE UPPER CENTER PILLAR GARNISH RH 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  63. REMOVE SPARE WHEEL COVER  (See REMOVAL )
  64. REMOVE REAR SEAT HEADREST ASSEMBLY LH 
  65. REMOVE REAR SEAT HEADREST ASSEMBLY RH 
  66. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY 
  67. REMOVE REAR SEAT CUSHION ASSEMBLY  (See REMOVAL )
  68. REMOVE REAR SEATBACK ASSEMBLY LH  (See REMOVAL )
  69. REMOVE REAR SEATBACK ASSEMBLY RH  (See REMOVAL )
  70. REMOVE REAR SEAT SIDE GARNISH LH  (See REMOVAL )
  71. REMOVE ROOF SIDE INNER GARNISH BOARD LH  (See REMOVAL )
  72. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH  (See REMOVAL )
  73. REMOVE REAR SEAT SIDE GARNISH RH 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  74. REMOVE ROOF SIDE INNER GARNISH BOARD RH 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  75. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  76. REMOVE MAP LIGHT ASSEMBLY  (See REMOVAL )
  77. REMOVE VISOR ASSEMBLY LH  (See REMOVAL )
  78. REMOVE VISOR ASSEMBLY RH 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  79. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY  (See REMOVAL )
  80. REMOVE REAR ASSIST GRIP SUB-ASSEMBLY  (See REMOVAL )
  81. REMOVE NO. 1 ROOM LIGHT ASSEMBLY  (See ROOM LIGHT )
  82. REMOVE INNER REAR VIEW MIRROR COVER (w/ EC Mirror)  (See REMOVAL )
  83. REMOVE VISOR HOLDER  (See REMOVAL )
  84. REMOVE SUN ROOF OPENING TRIM MOULDING  (See REMOVAL )
  85. REMOVE ROOF HEADLINING ASSEMBLY  (See REMOVAL )
  86. REMOVE FRONT SIDE RAIL SPACER LH (w/o Curtain Shield Airbag) 
    1. Disengage the 4 claws and remove the front side rail spacer LH.
  87. REMOVE FRONT SIDE RAIL SPACER RH (w/o Curtain Shield Airbag) 

    HINT:

    Use the same procedure for the RH side and LH side.

    Fig 1: Identifying Front Side Rail Spacer LH Claws
    G06016044Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  88. REMOVE REAR SIDE RAIL SPACER LH (w/o Curtain Shield Airbag) 
    1. Disengage the 4 claws and remove the rear side rail spacer LH.
  89. REMOVE REAR SIDE RAIL SPACER RH (w/o Curtain Shield Airbag) 

    HINT:

    Use the same procedure for the RH side and LH side.

  90. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Curtain Shield Airbag)  (See REMOVAL )
    Fig 2: Identifying Rear Side Rail Spacer LH Claws
    G06016045Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  91. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH (w/ Curtain Shield Airbag) 

    HINT:

    Use the same procedure for the RH side and LH side (See REMOVAL ).

  92. REMOVE SLIDING ROOF SIDE GARNISH LH 
    1. Disengage the 5 claws and remove the sliding roof side garnish LH.
  93. REMOVE SLIDING ROOF SIDE GARNISH RH 

    HINT:

    Use the same procedure for the RH side and LH side.

  94. REMOVE SLIDING ROOF GLASS SUB-ASSEMBLY 
    1. Using a T25 "TORX" driver, remove the 4 screws and sliding roof glass sub-assembly.
    Fig 3: Identifying Sliding Roof Side Garnish LH Claws
    G06016046Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Fig 4: Identifying Sliding Roof Glass Sub-Assembly Screws
    G06016047Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  95. REMOVE SLIDING ROOF HOUSING SUB-ASSEMBLY 
  1. Remove the 2 nuts and room light bracket.
  2. Disconnect the 4 sliding roof drain hoses.
  3. Remove the 8 bolts, 6 nuts, and sliding roof housing sub-assembly.
Fig 5: Identifying Sliding Roof Housing Sub-Assembly Bolts And Nuts
G06016048Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals