LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla S, 1.8 L, Standard >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Seat Belt >> Front Seat Inner Belt Assembly >> Removal

Front Seat Inner Belt Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Seat) 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system (See AIRBAG SYSTEM ).
  2. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Manual Seat) 
  3. REMOVE OUTER SEAT TRACK COVER (for Manual Seat)  (See REMOVAL )
  4. REMOVE INNER SEAT TRACK COVER (for Manual Seat)  (See REMOVAL )
  5. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)  (See DISASSEMBLY )
  6. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Power Seat) 
  7. REMOVE OUTER SEAT TRACK COVER (for Power Seat)  (See REMOVAL )
  8. REMOVE INNER SEAT TRACK COVER (for Power Seat)  (See REMOVAL )
  9. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)  (See REMOVAL )
  10. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Seat) 
    1. Disconnect each connector and clamp.
    2. Remove the nut and the front seat inner belt assembly.
    Fig 1: Identifying Front Seat Inner Belt Assembly And Nut
    G06015246Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals