LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla S, 1.8 L, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Seat Position Sensor >> Removal

Seat Position Sensor: Removal

  1. PRECAUTION 
    CAUTION: Be sure to read Precaution thoroughly before servicing (See AIRBAG SYSTEM ).
  2. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat) 
    1. Remove the front seat assembly (See REMOVAL ).
  3. REMOVE FRONT SEAT ASSEMBLY (for Power Seat) 
    1. Remove the front seat assembly (See REMOVAL ).
  4. REMOVE RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat)  (See DISASSEMBLY )
  5. REMOVE VERTICAL SEAT ADJUSTER KNOB CAP (for Manual Seat)  (See DISASSEMBLY )
  6. REMOVE VERTICAL ADJUSTING HANDLE (for Manual Seat)  (See DISASSEMBLY )
  7. REMOVE FRONT SEAT CUSHION SHIELD (for Manual Seat)  (See DISASSEMBLY )
  8. REMOVE SEAT POSITION SENSOR (for Manual Seat) 
    1. Disconnect the connector.
    2. Using a "TORX" socket wrench (T30), remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.
      Fig 1: Locating Seat Position Sensor Bolt
      G06014941Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.
    Fig 2: Removing Seat Position Sensor
    G04979725Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE SEAT POSITION SENSOR (for Power Seat) 
    1. Disconnect the connector.
    2. Using a "TORX" socket wrench (T30), remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.
      Fig 3: Locating Seat Slide Position Sensor Protector
      G06014943Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.
    Fig 4: Removing Seat Position Sensor
    G04979727Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals