Steering Pad Switch: Installation

INSTALL STEERING PAD SWITCH ASSEMBLY (for 4 Spoke)
1. Engage the 2 pins and install the steering pad switch assembly.
2. Install the screw.
  Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf)
  
  Fig 1: Locating Steering Pad Switch Assembly Screw And Pins (For 4 Spoke)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Engage the 2 pins and install the steering pad switch assembly.
4. Install the screw.
  Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf)
5. Connect the connector to the spiral cable.
  
  Fig 2: Locating Steering Pad Switch Pins (For 4 Spoke)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING PAD SWITCH LH (for 4 Spoke)
1. Engage the 2 pins and install the steering pad switch LH.
2. Install the screw.
  Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf)
3. Connect the connector to the spiral cable.
  
  Fig 3: Identifying Steering Pad Switch LH - 4 Spoke Model
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING PAD SWITCH ASSEMBLY (for 3 Spoke)
1. Engage the 2 pins and install the steering pad switch assembly.
2. Install the screw and engage the clamp.
  Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf)
  
  Fig 4: Locating Steering Pad Switch Assembly Screw And Clamp (For 3 Spoke)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Engage the 2 pins and install the steering pad switch assembly.
4. Install the screw and engage the clamp.
  Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf)
5. Connect the connector to the spiral cable.
  
  Fig 5: Locating Steering Pad Switch Assembly Pins And Clamp (For 3 Spoke)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING PAD SWITCH LH (for 3 Spoke)
1. Engage the 2 pins and install the steering pad switch LH.
2. Install the screw and engage the clamp.
  Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf)
3. Connect the connector to the spiral cable.
Fig 6: Locating Steering Pad Switch LH (For 3 Spoke)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING PAD (See INSTALLATION )
INSTALL LOWER NO. 3 STEERING WHEEL COVER (See INSTALLATION )
INSTALL LOWER NO. 2 STEERING WHEEL COVER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSPECT SRS WARNING LIGHT (See INSTALLATION )