Rear Center Seat Inner Belt Assembly: Removal

HINT:

• The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information are included.
• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. DISCONNECT BATTERY NEGATIVE TERMINAL 

   HINT:

   See PRECAUTION

2. REMOVE REAR SEAT CUSHION ASSEMBLY  (See REMOVAL )
3. REMOVE REAR SEAT HEADREST ASSEMBLY 
4. REMOVE REAR SHELF COVER CAP  (See REMOVAL )
5. REMOVE REAR SEATBACK ASSEMBLY LH  (See REMOVAL )
6. REMOVE REAR SEATBACK ASSEMBLY RH  (See REMOVAL )
7. REMOVE REAR DOOR SCUFF PLATE LH  (See REMOVAL )
8. REMOVE REAR DOOR SCUFF PLATE RH  (See REMOVAL )
9. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH 
10. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH 
11. REMOVE REAR SEAT SIDE GARNISH LH  (See REMOVAL )
12. REMOVE REAR SEAT SIDE GARNISH RH  (See REMOVAL )
13. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER LH  (See REMOVAL )
14. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER RH  (See REMOVAL )
15. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY 
    1. Remove the bolt and disconnect the rear seat belt assembly outer.

       HINT:

       Use the same procedures for the RH side and LH side.

       Fig 1: Identifying Rear Seat Belt Assembly Outer Bolt

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the nut and disconnect the rear seat inner w/ center belt assembly RH.
       Fig 2: Identifying Rear Seat Inner W/ Center Belt Nut

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 4 claws and the rear seat shoulder belt cover.

       HINT:

       Use the same procedures for the RH side and LH side.

       Fig 3: Identifying Rear Seat Shoulder Belt Cover Claws

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the 4 claws and the rear seat shoulder belt cover.
       Fig 4: Identifying Rear Seat Shoulder Belt Cover Claws

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Disengage the 5 claws, 4 clips, and the package tray panel assembly.
    6. Disconnect the connector and remove the package tray panel assembly.
       Fig 5: Identifying Package Tray Panel Assembly Claws And Clips

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
16. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH 
    1. Remove the bolt and the rear seat inner w/ center belt assembly RH.
       Fig 6: Identifying Rear Seat Inner W/ Center Belt Bolt (RH)

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
17. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH 
    1. Remove the bolt and remove the rear seat inner w/ center belt assembly LH.
       Fig 7: Identifying Rear Seat Inner W/ Center Belt Bolt (LH)

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002