LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Land Cruiser >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) >> Hazard Warning Switch >> Installation

Hazard Warning Switch: Installation

  1. INSTALL HAZARD WARNING SWITCH 
    1. Attach the 2 claws to install the hazard warning switch.
  2. INSTALL RADIO RECEIVER ASSEMBLY (w/o Multi-display)  (See INSTALLATION )
  3. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY  (See INSTALLATION )
  4. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  (See INSTALLATION )
  5. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY  (See INSTALLATION )
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    Fig 1: Identifying Hazard Warning Switch With Claws
    G05637187Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals